EMS not detected

vicsyracuse

New Member
Joined
Feb 4, 2008
Messages
2
Location
Mallards Landing, Georgia
Hello. I am installing a D-10A in my RV-7A. When it powers up I get EMS MAIN EMS Not Detected. Does anyone know how to get rid of this message and screen display, since I don't have it connected to an EMS? I tried the networking setup, but it shows the EMS is in the boot code, and won't allow changing it.

Thanks.
Vic Syracuse
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
You must have the EMS set as your default boot screen, instead of the EFIS.

With the unit on, press and hold the right most button until a menu shows up. This will let you choose what screens are in the rotation, and which one is the boot screen. Choose the EFIS screen and set it as the boot.
 

vicsyracuse

New Member
Joined
Feb 4, 2008
Messages
2
Location
Mallards Landing, Georgia
That's what I thought, and tried changing it on that page. I will try again, but for some reason it wouldn't let me change the order of the boot, so I thought it was a protected area. I'll try again.

Vic
 
Top