Errata

[swatson999]

Does Dynon have/publish an errata sheet for their manuals?

I found one minor when...when removing a bunch of wires from the EMS harness (ones that are not used or that I'm not planning on using, e.g., General TC 1 and 2, etc.), I found that it calls out on Table 19

18 White/Red Not connected

except, um, it is connected...to the MAP sensor

Pin WeatherPack Pin Color Function
18 C White/red +5 volt Auxiliary
26 B Green/red Manifold pressure
17 A Black Ground

How do we report, and how does Dynon disseminate, errors in their manuals to the user community?

 

[dynonsupport]

We don't publish errata sheets, but you can report anything you find to us via email or the forum like you just did. Thanks for that report, by the way.

We publish updated manuals with every firmware release, which has proven to be often enough for all changes so far. If there were something major that is found in between firmware versions (that would cause "bad" things to happen, versus some minor confusion), we'd republish right away.