Fittings for ADHARS

[N125YX]

What is the appropriate nylon AN fitting to attach the 1/4"ID- 3/8"OD tubing for the static/pitot/AOA ports. I ordered what I thought was right from Wicks, but missed by a mile. Thanks

 

[jakej]

The tubing can be any size you want but the industry convention is 1/4" (or use 1/8" OD if tight for space)  OD however the fittings into the ADAHRS are as per the manual page 5-3  1/8 NPT Male fittings.  

Jake J

 

[N125YX]

Thanks, I looked for that and missed it anyway!
Mike