flap position indication

[jefvervoort]

What connections are to be made to a Ray Allen Pos 12 in order to let Skyview indicate the flap position.

 

[jakej]

The info is on page 6-36 of the SV install manual - you did read the manual first ?

Jake J

 

[jefvervoort]

Thanks for reminding to read the manual completely.
I would use pin 18 firstly for the MAP sensor; is it good practice, or acceptable, to use this pin also for another application, like the POS 12 flap sensor ?

 

[n223rv]

That is what I did. I didn't see any other way around it...