Flysto upload - flight duplicates

[ve0kog]

I'm uploading the HDX user data exports to flyst for post flight analytics. (if you haven't tried it - it's pretty amazing)

One issue is that flysto does not recognize and discard previously uploaded telemetry and you end up with numerous duplicate flight entries as opposed to just the new flights since the last upload.

One way to address this is to truncate the csv HDX files to just the new data, but this seems tedios.

I'm curious if Dynon would consider adding an option to allow user data export which includes telemetry only since the last successful export. This can have a side benefit of competing this delta export to a usb stick much faster than the full dump.

Would this be a difficult option to add?


cheers

 

[RV8JD]

Note that you can clear the data logs after downloading them from the SkyView (or at anytime):

 

[ve0kog]

clear the data logs after downloading them

that's an idea, although I'm a data hoarder and would rather let Dynon roll off the flight telemetry on its own. My recording is set to a 2 second interval and estimate about 64 hours of data in the circular log.