Foreflight and export (wifi) to Dynon issues

[8181C]

I was flying from Oregon to northing Washington over the weekend. While in flight, I had to change my flight plan on foreflight. Once changed on foreflight, I exported it to my Dynon Skyview. I tried 3 to 4 times and each time it only exported 1 to 2 legs of the plan. Finally I had to give up and fly the Ipad with the Foreflight to view the complete flight plan. Any explanation for this? I have not tried this again since landing yesterday so I don't know if it's fixed or not. Thanks in advance. Larry

 

[Dynon]

Not immediately. Do you still have the offending flight plan handy? If so, can you send it to us via the email from foreflight option? (under the same menu as the send to SkyView option). If that's a possibility, send it to support at dynonavionics dot com, and also include a link to this thread if you're able to.

 

[NASA515]

Was this an IFR flight?

If VFR, why are you changing FP's via FF? Especially going from OR to WA. It's incredibly easy to manipulate Flight Plans directly in SV.

Bob Bogash
RV-12
N737G

 

[8181C]

This was a VFR flight plan. I will see if I can send you the flight plan for you to evaluate.
Thanks