freq problem with skyview and V16 radio

[N82rb]

I have a skyview classic with a MGL16 radio. It works well except, when i send a freq to the v16 like 122.75 the freq goes to the standby, then when i push it to the radio. the radio tunes 122.75 then will some times switch to 122.700 and the top bar will display 122.700. I if deselect the com port the radio works just fine. it appears that the skyview is changing the freq on the radio. it only does this on xxx.x25 it never does it when its a xx .x00 freq. any ideas?

bob

 

[DBRV10]

You need to sniff the serial port and watch the data coming out. Maybe the radio is screwing it up?

This is just me, but I prefer pushing the numbers in "digitally", not serially. I hope you get my attempt at humour but I do prefer and find it easier to do that. Maybe that is in your future?