I plan on using the Skyview Engine Management system.
with the UL Series Fuel Injected engine. The UL ECM provides an output signal in a duty cycle for Fuel used. They measure the time ( in %) that the injectors are open. When they are continue open 100% , the fuel flow is 48 litres/hour.
Can the Skyview EMS parameters be changed to allow this type of input to measure fuel cosumption? I do not want to put 2 fuel measuring devices to do this job.
Alan Smith
RV-12 Building
RV-6 Flying N495AB
KEOS
with the UL Series Fuel Injected engine. The UL ECM provides an output signal in a duty cycle for Fuel used. They measure the time ( in %) that the injectors are open. When they are continue open 100% , the fuel flow is 48 litres/hour.
Can the Skyview EMS parameters be changed to allow this type of input to measure fuel cosumption? I do not want to put 2 fuel measuring devices to do this job.
Alan Smith
RV-12 Building
RV-6 Flying N495AB
KEOS