I previously complained about SV not displaying tenths of a liter when using the red cube or CAN bus fuel flows in litres. I think I might have fixed it, at least for the CAN bus widget. On a hunch, I went into the sensor file and changed the display setting from 1 to 2 decimals an the resolution from 0.1 to 0.01.
For some reason the CAN fuel flow widget now displays tenths of a liter. I will do some engine testing to see if this is actually correct and also check the fuel computer accuracy. I wonder if the original issue is a conversion error.
A check of the CANBUS specification suggests the data from the ECU should be resolving down to 0.05 litres if Rotax is exactly following the protocol.
For some reason the CAN fuel flow widget now displays tenths of a liter. I will do some engine testing to see if this is actually correct and also check the fuel computer accuracy. I wonder if the original issue is a conversion error.
A check of the CANBUS specification suggests the data from the ECU should be resolving down to 0.05 litres if Rotax is exactly following the protocol.