Hello. Have a question. Internet search returned no results, so I address here. On an airplane fitted SkyView D1000 + D700, SV-GPS-250. SV-GPS is connected to port 5, as shown in the installation manual. Works correctly, shows the coordinates. Trying to connect parallel Garmin 495. Garmin is connected to the port [ch8470]2 with
SERIAL IN DEVICE: Garmin 495 \ 530
SERIAL IN FUNCTION: POS2
SERIAL IN / OUT BAUD RATE: 9600
SERIAL OUT DEVICE: NONE
In Garmin - mode is set Aviation In / NMEA & VHF Out. Data exchange goes on, but SkyView displays data from SV-GPS250 (different with Garmin screen), but not from Garmin. When i disable port [ch8470]5 with SV-GPS, in the menu GPS FIX STATUS shows no data. When enabled port 5 and port 2 - in this menu i don't understand how to switch between 2 and 5.
Installation manual not describe connection foreign devices.
Sorry for my bad english and perhaps a vague description.
Thanks.
SERIAL IN DEVICE: Garmin 495 \ 530
SERIAL IN FUNCTION: POS2
SERIAL IN / OUT BAUD RATE: 9600
SERIAL OUT DEVICE: NONE
In Garmin - mode is set Aviation In / NMEA & VHF Out. Data exchange goes on, but SkyView displays data from SV-GPS250 (different with Garmin screen), but not from Garmin. When i disable port [ch8470]5 with SV-GPS, in the menu GPS FIX STATUS shows no data. When enabled port 5 and port 2 - in this menu i don't understand how to switch between 2 and 5.
Installation manual not describe connection foreign devices.
Sorry for my bad english and perhaps a vague description.
Thanks.