schooner49
New Member
- Joined
- Jun 4, 2021
- Messages
- 1
Just installed new Dynon Skyview system in RV-9A replacing GRT screens that failed.
Can't get the e-nav button when autopilot selected to work.
The GPS is wired to the arinc 429 correctly so, the information from the gps must be
the wrong format .
What are the proper settings for the information transfer?
Thank you
schooner 49
Can't get the e-nav button when autopilot selected to work.
The GPS is wired to the arinc 429 correctly so, the information from the gps must be
the wrong format .
What are the proper settings for the information transfer?
Thank you
schooner 49