lolachampcar
New Member
- Joined
- Jul 17, 2011
- Messages
- 249
50+ hours on Skyview, most .6 hops => lots of boots.
I went to reset fuel this morning after a flight and the panel boot looped on me twice (2 times past the Dynon Splash without a Linux POST screen) then booted normally. I reset fuel then switched off the master. The screen shut down instantly instead of asking me to hit the off button (standby power).
Has anyone else experienced this? Is it common or is it an indicator of a larger problem. BTW, battery voltage was at 13.2 volts per Skyview on a subsequent boot.
I went to reset fuel this morning after a flight and the panel boot looped on me twice (2 times past the Dynon Splash without a Linux POST screen) then booted normally. I reset fuel then switched off the master. The screen shut down instantly instead of asking me to hit the off button (standby power).
Has anyone else experienced this? Is it common or is it an indicator of a larger problem. BTW, battery voltage was at 13.2 volts per Skyview on a subsequent boot.