GPS input from GNS430

[Frabcis94]

All, I’m at a loss and need some help.

I recently installed the 429 module and completed all the wiring in accordance with the installation manual. My SkyView system is detecting the 430 and it will show flight plans from the 430 but it’s not getting any gps positioning.

In the Main ARINC429 Config page I don’t have an airdata/EFIS option.

 

[Dynon]

A couple of thoughts:

The GPS fix won't be valid to SkyView without the serial wire going from the 430 to the ARINC module.
Also, check and see what the GPS role is under SYSTEM SETUP > ARINC-429.

If those don't shed light, touch base with our support team (contact info in signature)...