gps

[hkjon888]

Dear Forum Members. I have a Skyview Classic with a 15.4.7 update at the moment. For some reason after some Pocket FMS terrain updates I cannot find Transponder Status (see screenshots). Any help on where I'm going wrong will be much appreciated.
Jon Martin

 

[skysailor]

The transponder is a serial device (not Skyview network) in the Dynon system. Check to make sure it is still shown on you Serial setup page. If it is there, look for Good Sentences counting up. Check to make sure transponder is powered.

 

[hkjon888]

The transponder is a serial device (not Skyview network) in the Dynon system. Check to make sure it is still shown on you Serial setup page. If it is there, look for Good Sentences counting up. Check to make sure transponder is powered.

Response from Don Jones:
"....if it died from a transponder update, then it will need to come in for repair."
I've sent it back to Dynon as it falls into this category. Many thanks for your support with the above. It really helped.
Jon

 

[skysailor]

Happy to help!