How to create a gear warning in D-180?

[Marc_Michel]

I like to "program" a gear not down warning with the folowing inputs:

3 gear microswitch not down
airspeed below 70 KIAS
Trottle or manifold not maximum

any insight for me.

Many thanks
Marc

 

[Rhino]

Landing Gear Inputs to EMS

Dynon drawing 103488-000 shows EMS inputs for gear down (three) and gear transit circuits. Pages 7-70 and 7-71 of the SkyView System Installation Guide show how to configure the inputs. It's not clear how the logic works to cause gear warnings, i.e., per page 12-11 of the HDX Pilot's User Guide...

forum.flydynon.com

 

[Marc_Michel]

Thanks Bob, but

I have a D-180 and not a new SkyView..

 

[Rhino]

And you think I'd notice that.....

 

[Marc_J._Zeitlin]

I like to "program" a gear not down warning with the folowing inputs:

3 gear microswitch not down
airspeed below 70 KIAS
Trottle or manifold not maximum

Look at the D180 (or EMS-D120, or EMS-D10) Installation guide. There are a couple of "contact" inputs that you can use to create on-screen indications. HOWEVER, you won't be able to have them sense IAS. But you CAN hook up microswitches in series so that the circuit will only "ground" the contact when the all the microswitches are closed.