HS34 wire harness

[kirby]

I am making a harness to install an HS34 with a garmin 530 and D100. Pins P5001 46 and 47 on the 530 go to the Sorcerer auto pilot. Can I splice into these wires for pins 11 and 23 on the female DB25 on the HS34 ? If not, what is the solution ?

Thanks, Kirby

 

[dynonsupport]

Shouldn't be a problem, but really this is a good question for Garmin. Not sure how many devices they spec their outputs to be able to drive.

 

[kirby]

OK thanks.

 

[kirby]

Email Notification from Garmin Aviation Product Support

Thank you for contacting Garmin Aviation Product Support. Your service record has been created with the information below. To provide additional information regarding your request, please reply to this email, typing your new information at the top of the email message area.

If you have submitted a new request by email or through our Web site an agent will respond as soon as possible, generally within two business days.

For immediate assistance please call Garmin Aviation Product Support and refer to the Service Record Number below. Regional phone numbers and business hours are listed on our website at https://fly.garmin.com/fly-garmin/support/.

Service Record Details
Service Record Number: 32738
Subject: GPS ARINC 429 OUT AB
Last update: 11/17/2011 07:15:20
Name: Kirby Elliott
Phone:
Email: elliot225@bellsouth.net
Brief description of the problem:
Yes, you can splice the 429 output wires. This output can handle up to 5 loads.

 

[kirby]

Shouldn't be a problem, but really this is a good question for Garmin. Not sure how many devices they spec their outputs to be able to drive.

Email Notification from Garmin Aviation Product Support

Yes, you can splice the 429 output wires. This output can handle up to 5 loads.