IMPORTANT WARNING !!!

[p92]

The 25-pin female EFIS harness that is being sold with the EFIS D100 package comes with the colors all mixed together, that is, there is no color that matches with none of the ones explained in the scheme on page 2-2 in the EFIS D100 Intallation guide.
Please WATCH OUT what you guys are selling to clients !!!.

 

[PhantomPholly]

I got the pre-wired harness for my D-180; all the colors matched exactly what the instructions said.

Is it possible they just sent the wrong harness?

 

[dynonsupport]

We'll look into this on Monday, but this is the first time we've heard of this. We sell hundreds of these a month so we'd probably hear about it a lot if it was a continuous problem.

Do you happen to have the part number of the harness you have? I'm guessing you somehow got an EMS harness, not an EFIS harness. Did you buy direct from us or a dealer?

 

[p92]

Yes, I bought the equipment at aircaftspruce.com
On the other hand, let me check if they´ve sent me an EMS harness instead. I´ll try to answer you by the end of the month.
Thanks for the help.

 

[p92]

...back on track again!!!, I confirm I have: D10A/D100/D180 Wiring Harnes Ref: 100425-000
P/N: 10-01158
LOC: 02GA, (last two lines might be AircraftSpruce Info.)

Did you find what´s wrong???

 

[dynonsupport]

Is that the part number on the bag, or is it the part number on the invoice?

We've checked our stock and there is nothing wrong here, and we have not yet had another customer with your problem. So something is very strange.

 

[p92]

Let me insist on the matter, the part number of the harnes (100425-000) is the same that you use for sale on your web. And yes, you are right, there´s something strange !!!

 

[dynonsupport]

The only other thing we can think of is perhaps a wrong harness ended up in the 100425-000 bag. Is there a DB-25 connector on the end of the connector, or a DB-37? I wonder if you have an engine monitor harness there (it would have a DB-37)

 

[p92]

Let me check, I´ll have a look...