There is virtually no airport information loaded for most CDN airports. I understand that if we Canadians purchase Jeppesen we gain a lot of the functionallity that the US currently has. My question, does this Jeppesen data allow for the Comm "push" of frequencies to the SV-COM? will this work just like the current US data? If not, there really is no use for us to ditch the SL-30 for teh SV-COM in my mind.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Jeppesen and SV-Com freq "push"
- Thread starter rtairey
- Start date
- Joined
- Mar 23, 2005
- Messages
- 13,226
Yes, the Com Radio does not care what database you have. If it has frequencies for an airport, it will use them, so the additional data from Jeppesen will be very helpful in Canada.
Additionally, you should consider PocketFMS which has even more data in Canada than Jeppesen for smaller airports and is much less expensive.
Additionally, you should consider PocketFMS which has even more data in Canada than Jeppesen for smaller airports and is much less expensive.
Thx, I downloaded the PocketFMS to the 10 in display ( the one I have it registered to) and it sticks. However, when I power Both units, the units synchronize and it overwrites the new PocketFMS software with the old Dynon software on both units. What is the secret?
- Joined
- Mar 23, 2005
- Messages
- 13,226
Hmm, it shouldn't do that. But, you can fix this. Before you load PocketFMS on either screen, power both up, and go into setup on both and go to INSTALLED DATABASES. Select the FAA database and press delete. This will erase that database and now when you load PocketFMS it will copy to the other screen.