swatson999
Well-Known Member
- Joined
- Oct 6, 2010
- Messages
- 1,528
Up shooting approaches today, and we just want to confirm what we think we read in the manual...
I have a Garmin 430W and the SV1000 (with all the bells and whistles and databases and all that).
So...on an ILS approach, once the approach is loaded in the Garmin, and I'm on vectors to final (or after the IAF), I have to manually set the PFD/HSI to use the ILS (the VLOC side of the 430) by going into the menu and setting PFD-HSI-Nav Source to NAV1...right?
I.e., it won't switch to it automatically based on anything coming out of the ARINC 429 box, even if the Garmin unit properly changes modes from GPS to VLOC, right?
I have a Garmin 430W and the SV1000 (with all the bells and whistles and databases and all that).
So...on an ILS approach, once the approach is loaded in the Garmin, and I'm on vectors to final (or after the IAF), I have to manually set the PFD/HSI to use the ILS (the VLOC side of the 430) by going into the menu and setting PFD-HSI-Nav Source to NAV1...right?
I.e., it won't switch to it automatically based on anything coming out of the ARINC 429 box, even if the Garmin unit properly changes modes from GPS to VLOC, right?