Lost my PFD menu

[N119MA]

I've been out of flying for a while due to health so I'm a little weak on the my Dynon HDX Touch. When I flew this week I noticed that the main PFD menu was not there. I worked the menu's and couldn't get it back. The SW is up to date. Looking for some help. I've reviewed the video's to make sure my brain was engaged.
Thanks ahead N119MA Bristell light Sport

 

[djones]

It would be useful to get me a picture or screen shot of what you have missing so I can best advise you here.
If you push the DISPLAY button does the menu come up blank? If this is the issue, send an e-mail to support@dynonavionics.com
and I can get you a file to load to correct it.

 

[N119MA]

D Jones, Thanks for responding. I'll start with an apology as I may have jumped the gun.
Our Dynon config recently was upgraded from a Classic to a HDX Touch.
After training transition, thanks to Kirk for the you tube video's and manual download I became basically proficient.
Then I suffered two illness that took me out of flying for a year.
When I returned I had reviewed a few of the videos that were classic related, not HDX,
and when I went flying I'm looking for that main menu with PFD on button 1.
After sending the forum note I returned to the videos and manual and realized
that the HDX main menu is with Direct on button 2.
Having said all that please let me know if I'm completely off base. Again thanks for responding.
Thanks ahead. Mike Deptula N119MA/KLNS

 

[djones]

Mike,
On the HDX pressing the MENU button brings up the PFD TOOLS, EMS TOOLS, A/P, etc. so yes, it's a bit different than Classic SkyView's.