Can anyone help me? I have a Lycombing 233 with a light speed engineering ignition system. I can't get the TACO to work or change the widget colours. I have tried everything the book/manual describes without success. Everything else works perfectly fine. Any help would be greatly appreciated.
Lycombing TACO
- Thread starter don55
- Start date
Where are you picking off the tach signal? The plasma II and II have a 10V pulse on one of the connectors that should work with our products. Which of our products do you have, by the way? If SkyView, which RPM input are you using?
So that's an analog signal for a tach. You want input connector pin 6 on the Plasma III, which is the pulse we need. See http://www.lightspeedengineering.com/Images/PlasmaINPUT.pdf
Thanks for the information, everything in my Dynon now works. I thought I had tried pin 6 on the input originally
but when I checked it from your info I realised I had counted 6 from the wrong side!! ( dumb Don ). Thankyou again for your great customer service & product.
but when I checked it from your info I realised I had counted 6 from the wrong side!! ( dumb Don ). Thankyou again for your great customer service & product.