Mark sensor failed request

[swatson999]

Since I have an EGT probe going bad, and won't replace it until the next oil change (as it's really only a nuisance), it would be nice to be able to mark a sensor failed (when one knows it's the sensor and not something else) so that the system doesn't display it (or displays a red X or something). That jittering, jumping gauge is like a magnet for my eyes, and with an EGT probe OTS, the lean function won't work properly.

Just a minor request for the future features list.

 

[dynonsupport]

You can "deactivate" that EGT probe by setting the pair to "unused".

For example, for EGT #1:
SETUP MENU > EMS SETUP > SENSOR INPUT MAPPING > (one more right click) > C25 P13/25 - set FUNCTION to UNUSED > SAVE (button).

Since I have an EGT probe going bad, and won't replace it until the next oil change (as it's really only a nuisance), it would be nice to be able to mark a sensor failed (when one knows it's the sensor and not something else) so that the system doesn't display it (or displays a red X or something).  That jittering, jumping gauge is like a magnet for my eyes, and with an EGT probe OTS, the lean function won't work properly.

Just a minor request for the future features list.