Mooney Autopilot installed

[JimAZ82]

I did a test flight Sunday and today flew a three hour cross country with the new autopilot. I will post Additional installation tips soon

 

[JimAZ82]

this is N201CX new integrated with the old panel style Very happy to have an autopilot again.

 

[JimAZ82]

 

[Cliffy]

Wish they had done my short body D as I love my HDX
But I had to go another route for the A/P
If they ever do I'll switch back but I doubt they will do it.

Do you have pictures of the servo installations? I would really like to see where and how they installed them

 

[Mooney231]

Pictures of the pitch and yaw servo installation would be appreciated. The roll servo looks fairly straight forward since it goes in the same location as the Century servo (even the rivet holes are exactly the same.

 

[M20Driver]

My son and I just installed one in a J for a local guy. I test flew it. Absolutely rock solid.

 

[Mooney231]

Here's my panel with the AP installed. Follow the instructions and all went as advertised. Do not install a switch to turn off the yaw damper, however, that does cause issues. PM me with questions about the installation. The AP really is rock solid, flying a flight plan and an approach is wonderful (I was without an AP for over 10 years).