moving map

[romeo219]

1) In order to have a larger number of Waypoints on my moving map , I have created  with Google earth some more Waypoints , 
I have copied Waypoints on a memory stick (after they were converted to fills that can be read by the Dynon system)
Since I have two displays (10") I have connected the memory stick to both of them (one after the other) and imported the fills,
The first import ( to the first display) went well, in the second display I did the same routine and the system has confirmed that the new
Fills were add successfully… but the new Waypoints didn’t  show on the screen and  I see only the old one without the new Waypoints  , I imported it twice but it didn’t help
What should I do ? 

2) On the Google earth system I chose an Dot gray icon to show as Waypoints but on the moving map it shows a yellow pin? how can I change it? 

3)I want to show on the moving map only the Waypoints that I add , how can  clear the Waypoints that  comes with your data base (middle east-israel)
In case I cannot  do it, how can I know what  Waypoints you have in your data base so I don't add Waypoints  they are already in the data base
The reason for that is that a get sometimes double Waypoints when I add new Waypoint

 

[mmarien]

1) Check the scale at which the waypoints show up on the second SV. It's under the MAP MENU. It maybe set too small.

2) Page 7-41 of the Pilots Guide has a list of symbols. Could be the Google symbols don't convert properly with the software you're using. You may have to hand edit the CSV file.

3) I don't believe there is a way of filtering the cultural data waypoints. You can delete the duplicates from your CSV file though.

 

[romeo219]

1) Thanks for your answer ,regarding your reply to item no 1 in  my question ,yes I get on the screen the short name and not the long name, can you guide me step by step how to change the short name that appears  to the long name of the why point  , it seems  that  the system selected from CSV files short name and not the long name that I want to see
2)How can I change on the map the size of the fonts I want them to be smaller

 

[romeo219]

I've created hundreds of way points through the moving map, please instruct me how to get to the screen where there is the list of the points so  i can choose the points i need to create route on the screen, till now i created a route on the screen by the searching each  way point separately and not from a list

 

[dynonsupport]

1)
2) On the Google earth system I chose an Dot gray icon to show as Waypoints but on the moving map it shows a yellow pin? how can I change it? 

The Google Earth icons are not used in SkyView (the old Google Earth export tool predates the current waypoints system) You can change the icons in either MAP > MAP MENU > EDIT USER WAYPOINTS, or manually in the CSV file. The list of waypoint icons is in the manual.

 

[dynonsupport]

1) Thanks for your answer ,regarding your reply to item no 1 in  my question ,yes I get on the screen the short name and not the long name, can you guide me step by step how to change the short name that appears  to the long name of the why point  , it seems  that  the system selected from CSV files short name and not the long name that I want to see

I'm not sure I fully understand the question. The "short name" in the CSV file is used as the "Identifier" in SkyView, and the "long name" in the CSV file is used as the "Name" in SkyView. The short name/identifier has an 8 character limit. Does that answer your question?

2)How can I change on the map the size of the fonts I want them  to be smaller

Those font sizes can not be changed.

 

[dynonsupport]

I've created hundreds of way points through the moving map, please instruct me how to get to the screen where there is the list of the points so  i can choose the points i need to create route on the screen, till now i created a route on the screen by the searching each  way point separately and not from a list

They're available anywhere that normal waypoints / airports are available from. In other words, you can use the NRST button, then click right to USER, or you can go to INFO or Direct-to and spin in an identifier or name, or, you can go to FPL > INSERT WAYPOINT.