I finally am getting the replacement ADSB-472!!!
The Installation Manual says "Once mounted and wired, be sure to update the serial settings: SETUP MENU > SYSTEM
SETUP > SERIAL PORT SETUP > SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-
472 to) > SERIAL IN DEVICE > SV-ADSB-472 > ACCEPT (button)
So this is simply a "find my new device" and press Accept? That sound too easy...is there any other gotchas or tips and tricks to be concerned with?
The part about the "SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-472 to)" is a bit confusing...I do not remember finding the serial port the last time...is it as simple as looking on the screen and finding the item on the list called "ADSB-472"?
-Any operational changes or feedback you can share?
THANKS for the help!!!
The Installation Manual says "Once mounted and wired, be sure to update the serial settings: SETUP MENU > SYSTEM
SETUP > SERIAL PORT SETUP > SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-
472 to) > SERIAL IN DEVICE > SV-ADSB-472 > ACCEPT (button)
So this is simply a "find my new device" and press Accept? That sound too easy...is there any other gotchas or tips and tricks to be concerned with?
The part about the "SERIAL PORT x SETUP (the serial port you wired the SV-ADSB-472 to)" is a bit confusing...I do not remember finding the serial port the last time...is it as simple as looking on the screen and finding the item on the list called "ADSB-472"?
-Any operational changes or feedback you can share?
THANKS for the help!!!