OAT/Backup battery connectors?

[Steve SR]

Hi gang,

Really like the size and style of those connectors, I'd like ot use them on a couple other non-Dynon pieces of equipment in my build, anyone know where I can get them, or are they a proprietary Dynon design?


Thanks

 

[RV8JD]

Below is the OAT connector info from the SkyView System Installation Guide, Page 23-4:

"OAT Connection

For SkyView pilots that are converting from other Dynon Avionics products, you can use your installed OAT with the addition of the connector below. Both 100433-000 and 100433-001 are compatible. The OAT wiring can be extended as required. If you have 100433-001, ignore the red wire and connect the yellow and blue wires to the connector below. The OAT is non- polarized; either wire can connect to either pin.

Connector: Molex Micro-Fit P/N 43645-0200 (Digi-Key P/N WM1845-ND)
Pins: Molex Micro-Fit P/N 43030-0007 (Digi-Key P/N WM1837-ND)
Wire: 22 AWG Tefzel"​

 

[Steve SR]

Excellent!!!!

Thank you, sir.

 

[caummisar]

If you look REAL close, I think those Molex part numbers are printed on the connector bodies.