The oil temperature normally runs about 230 to 250 deg. here in Las Vegas. Oil temp reading started to become jumpy and erratic for a while and now it goes right up to 280 degrees (red line). I replaced the transducer and still get the same results. All other indications are normal. Oil pressure 57#, CHT at 205, EGT about 1000 on all cylinders. I am using the D-1000 SkyView and I am thinking that the EFIS is reading wrong.
Any ideas on how to proceed would be appreciated.
Ernie
702-656-3845
Any ideas on how to proceed would be appreciated.
Ernie
702-656-3845