Oil Temp Sensor will not fit Lycoming port

[B.Blenden]

I have a new IO 360 M1B from Van's (delivered in March). I purchased the Dynon Skyview EMS harness and sensor kit which included the oil temp sensor (part no 100409-001) which has the 5/8" threads. The sensor threads are too small, and just drop into the hole on the oil temp port. Any ideas? Do you sell any adapters for typical lycoming ports.

Bob

 

[dynonsupport]

I have a new IO 360 M1B from Van's (delivered in March). I purchased the Dynon Skyview EMS harness and sensor kit which included the oil temp sensor (part no 100409-001) which has the 5/8" threads. The sensor threads are too small, and just drop into the hole on the oil temp port. Any ideas? Do you sell any adapters for typical lycoming ports.

Bob

We had a batch of these sensors from our vendor that did not have the correct thread. Please call Tech Support - 425-402-0433 and they'll arrange for you to get a replacement sensor.

 

[B.Blenden]

Thanks, I called tech support and they are sending me a replacement.