Outside temperature set up for Skyview 10'??

[herberttelge]

I purchase a RV12 kit from Vans with a Skyview 10' package, my Outside temperatue indication is much highr than real temperature outside the aircraft. Is there a set up for the temperature indication?? I can not find if there is a set up for this or how to cerrect the problem.

Hope to hear from someone soon.

Best regards, herbert Telge, Lima, Peru.

 

[GalinHdz]

I purchase a RV12 kit from Vans with a Skyview 10' package,  my  Outside temperatue indication is much highr than real temperature outside the aircraft.  Is there a set up for the temperature indication??  I can not find if there is a set up for this or how to cerrect the problem.

Hope to hear from someone soon.

Best regards, herbert Telge, Lima, Peru.

Page 5-9 of the SkyView Installation Guide provides how to adjust the OAT offset value to better compensate for installation location errors. This gives a better match to the actual temperature:
http://www.dynonavionics.com/downlo...iew_System_Installation_Guide-Rev_T_v12.0.pdf

 

[dynonsupport]

Herbert:

The first thing to check is to see if you have the OAT set to the correct UNITS (°C vs °F) - SETUP MENU > SYSTEM SETUP > MEASUREMENT UNITS > OAT.

I purchase a RV12 kit from Vans with a Skyview 10' package,  my  Outside temperatue indication is much highr than real temperature outside the aircraft.  Is there a set up for the temperature indication??  I can not find if there is a set up for this or how to cerrect the problem.

Hope to hear from someone soon.

Best regards, herbert Telge, Lima, Peru.