Pilot User Manual Stc'd D10A

WEdgar

AP; IA
Joined
Aug 27, 2016
Messages
27
Location
Sacramento
The first page of the above reference Pilot's Guide clearly states:

"Pilot’s User Guide
P/N 100349-000, Revision K
For use with firmware version 5.4
August, 2010
Dynon Avionics, Inc.
This product is not approved for
installation in type certificated aircraft "

Certified aircraft require a CERTIFIED PILOT'S GUIDE; the FAA approved the Stc'd D10A, there must be a CERTIFIED PILOT'S GUIDE some place. Please advise.
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
That is the correct user guide.

The FAA did not require us to write a new user guide since we already had a great one, and they do not review operators guides as part of certification. So there is not a "certified" one.

I guess at some point we will need to revise that one to remove that one line. Sorry for the confusion.
 

WEdgar

AP; IA
Joined
Aug 27, 2016
Messages
27
Location
Sacramento
For Certified airplane you need a Certified Pilot's Guide; this should come at the installation signoff and at annual. This Pilot's Guide that says "Not For Certified Airplanes" won't work, hopefully this will get taken care of soon.
 
Top