Possible V7 glitch

[DonFromTX]

I attempted to take some screen shots of what my skyview is saying about the AP servos to send to Dynon, and it would not work. I have taken lots of screen shots previously, no problems. What happens is when you push the buttons the "Screenshot In Progress" comes up - and just stays up! You have to turn the skyview off and restart it to get rid of the notice. I tried three different drives, then erased all data from them and tried again, no success. Anybody else have such a problem?

 

[jakej]

Hi Don

It's a known 'bug' http://dynonavionics.com/cgi-bin/yabb2/YaBB.pl?num=1379619343

Jake J

 

[DonFromTX]

I remembered I HAD taken a screenshot after V 7. I have been working the wires behind the panel, so on a lark I plugged a stick into the USB port on the back of the Skyview - presto I got a screenshot nice as can be. I am betting I pulled a wire loose or some such thing while working.

 

[preid]

Try taking two screenshots while flying and see if it really is resolved.
I had a screenshot work than when flying tried again and it did not work again.

 

[dynonsupport]

SkyView software 7.01 has been released that fixes the screenshot issue.

http://dynonavionics.com/docs/support_software_SkyView.html

 

[jc2da]

I figured i would reuse this thread for another possible glitch. Has anyone else noticed this?

The white ground track line on the MAP tends to fidget around now. It will move one pixel to the right, then one pixel to the left at about 120Hz or so frequency. I never noticed this before on previous versions, so i can only surmise it's a new glitch in V7.

Anybody else notice this?

Jae

 

[dynonsupport]

Jae,
Do you really mean 120Hz? There's a whole bunch of reasons that seems really unlikely so I just want to be sure.

I think we're going to need a video of this one...

 

[jc2da]

Wilco. As soon as we get a decent weather window here i will get some video. I have noticed it now on the last 3 flights or so and only made a mental note of it. The next flight, i will focus on it more. Also, i am always in 40/40/20 screen mode as well.

Jae

 

[dynonsupport]

So we have been able to re-create this here. Been there for years, it isn't new for 7.0. On the list now.

 

[jc2da]

Thanks for the update. Interesting, i could have sworn it was fine before, as i never noticed it before. It is quite subtle but definitely something i noticed the last few flights. Glad to hear it's on the list.