Power Flarm II

Tomyfly

New Member
Joined
Sep 10, 2011
Messages
19
Hallo!

I found this in the manual:

Pin 5 of Power Falarm standard sends the most important NMEA 0183 version 2.0 --- compatible GPGGA and GPRMC with a configurable data rate, and Garmin --- proprietare message PGRMZ with high barometric information. Other messages for a third party application (eg external display) provided

Do you think it is possible that SV can read this format?

Thomas
 

dynonsupport

Dynon Technical Support
Staff member
Joined
Mar 23, 2005
Messages
13,226
On specification SkyView would likely be able to use that as a GPS position source. But you would have to actually try it to know for sure, as some devices sometimes don't fully conform to the NMEA specification.

As for traffic, SkyView needs TIS format data from external devices. Some flarm/powerflarm devices, such as those made by http://www.garrecht.com/, can do this. I don't know that all can.
 

Tomyfly

New Member
Joined
Sep 10, 2011
Messages
19
:DToday I get this answer from Powerflarm:

Hello, Thank you for your message!

within the next few weeks, the Garmin interface will be available. Once this is done, the Skyview integration will be possible.

:D Best regards, Joachim Fetzer Butterfly Support
 
Top