Question on EFIS screen operating in 1/3 and 2/3

[Brantel]

Do you loose these items:

When the EFIS is in 1/3 or 2/3 mode?

Can we get a screen shot of the elevator trim indicator running on the EFIS screen?

If we put the elevator trim indicator on the EFIS screen, what if anything do we give up?

Does the elevator trim indicator work on the EFIS running in 1/3 or 2/3 mode?

Are there any plans to add the flap pos to the EFIS screen?

 

[dynonsupport]

Re: Question on EFIS screen operating in 1/3 and 2

You still have info items in 2/3 mode. You do not have any info items, CDI, winds, etc in 1/3 mode. Heck, in 1/3 mode you don't even get airspeed and alt tapes.

I don't seem to have an image of the trim handy. It's a box in the lower right corner of the screen right under the altitude digital number. It has pointers on the outside for current trim, a green line for takeoff trim, and marks inside for zero trim.

You don't give up anything by putting trim on the screen. It works in 2/3 mode but not 1/3.

There are no plans to add other position indicators to the EFIS screen.