Just want to confirm that it does not matter where components are wired into the network. All the examples show the EMS module connected directly to the SlyView display, and the two displays directly connected to each other by a network cable. But if I understand the network, the two displays could be connected through the AP-Panel, for example, and the EMS module through the Knob-Panel. As long as I can trace a line between all the modules on the network to all the other modules on the network my setup should have full functionality. Correct?
Question on wiring the network hub
- Thread starter TJRV8
- Start date
Savannah_flyer
I love flying!
- Joined
- Apr 11, 2014
- Messages
- 37
The only reason why the two screens are connected directly with a network cable (like the ones we find in PC's and LAN's) is to share and synchronize databases such as EasyVFR datasets. But this cable IS not part of the Skyview network. All modules ,including the screens, can be connected in any possible way e.g. daisy chained, a screen to the SUV autopilot panel, a radio to a screen etc, all to a hub etc.