Remote magnetometer

[JTD]

If mounting the remote magnetometer in a wing tip, what consideration should be given to the strobe and position lights and their wiring

 

[dynonsupport]

A remote magnetometer, either the EDC-D10A for our older products, or the SV-MAG-236 for SkyView, won't work reliably in the vicinity of a strobe (the power supply, wiring to the strobe, and the strobe itself) because of the electrical pulse for the strobe.

If mounting the remote magnetometer in a wing tip, what consideration should be given to the strobe and position lights and their wiring

 

[JTD]

Does anyone have any experiences mounting magnetometer in the aircraft tail, about 5 ft. from a electro hydraulic pump used in lancair's. It is intermittent operation used only in raising and lowering gear

 

[dynonsupport]

If you already have the remote magnetometer in hand, suggest temporarily installing it (tie wrap, duct tape [preferably non-aluminum duct tape] and giving it a try. Just try to keep it away from the power line to the hydraulic pump.

Does anyone have any experiences mounting magnetometer in the aircraft tail, about 5 ft. from a electro hydraulic pump used in lancair's.  It is intermittent operation used only in raising and lowering gear

 

[skysailor]

Works in the Glasair

The ADAHRS in my Glasair is less than 3 feet from the hydraulic pump (same as used in the Lancair) and there are no problems at all.

 

[llacy]

will the magnetometer from the D10 affect the remote magnetometer for sky view and it so how far apart should I install them?

 

[dynonsupport]

They will not interfere and can be as close to one another as you wish.