BMW_X6M
RV-9A O-320 Catto Prop. Dual HDX, ADSB GTN650
I have found the Audio Alerts to be exeedingly usefull for a low time pilot such as myself. I was hoping Dynon would expand on these alerts, and make many more configurable in future software updates. Some that I would really like are listed below:
"AIRSPEED LOW" I would like to be able to set a low airspeed number so that I would get a warning if the airspeed was down to that configurable number. This could potentially prevent a stall and seems obvious it is needed.
"AIRSPEED HIGH" This could also be useful.
"500 FEET" This would come on when the absolute altitude was recognized as being this number above the ground. The software could have several different numbers here.
"CROSSWIND" I was thinking this could be enabled during slow flight so that you would take a look at the crosswind component if it was above a certain amount during final.
I am hoping that others will add to this list and a consensus could be derived for the most important ones. Thank you.
"AIRSPEED LOW" I would like to be able to set a low airspeed number so that I would get a warning if the airspeed was down to that configurable number. This could potentially prevent a stall and seems obvious it is needed.
"AIRSPEED HIGH" This could also be useful.
"500 FEET" This would come on when the absolute altitude was recognized as being this number above the ground. The software could have several different numbers here.
"CROSSWIND" I was thinking this could be enabled during slow flight so that you would take a look at the crosswind component if it was above a certain amount during final.
I am hoping that others will add to this list and a consensus could be derived for the most important ones. Thank you.