Rotax 912 coolant temperature

[CarlosQ]

Hello. What do I need to change in the HDX if I changed and old 912ULS with the old cylinder heads for the a new one with the suffix -01 heads?
Im aware of:

-. SETUP MENU > EMS SETUP >DISPLAY COOLANT INSTEAD OF CHT
I have done this an apparently nothing changes

-. The labels on the screen doesn’t change. Seems that is necessary to edit the name of the sensor

-. In the layout editor, nothing changes, there is not a new sensor that states coolant temperature.

-. I assume that the gauge ranges for CHT and CLNT are different. I don‘t see any difference.

do I’m missing something? There is another procedure I need to follow? If so, where?

thanks

 

[Dynon]

The only thing this should change is the word CHT to CLNT. Did you do anything custom with your pin mapping nomenclature? It does not inherently change the ranges - you'll need to adjust them yourself.

 

[CarlosQ]

I haven't changed any configuration but I can change the values if they are not the factory ones. What is the default nomenclature?
Thanks.