ROTAX PERCENT POWER INDICATION

[Bill_H]

I am running the initial release of Skyview 3.3. So I know I need to upgrade based on the announcement, and will.

I am having problems with the percent power indication for my RV-12 with Rotax 912.
FIrst, I have specified EMS SETUP > ENGINE INFO > ENGINE TYPE> Rotax 912

Now, on the 50% size engine page, I added the INFO item "Percent Power." But when running, that is shown with a red X through it.

On the 100% size engine page layout, the INFO item list does not even show "Percent Power" as a possibility.

And on the 20% size engine page, the INFO item list does not show "Percent Power" as a possibility.
++++


Thanks! Bill H.

 

[dynonsupport]

We should be more specific there. % Power is only available for Lycoming/Continental engines. The power charts for 912 is unfortunately not as straight forward to incorporate into a % power readin.

 

[Bill_H]

I was under the impression - could be wrong - that this feature was possible on the D-180. I was in D-180 RV-12 where I thought it was displayed - again, not sure.
Thanks, I will assume it was not on the D-180 unless you answer otherwise.

 

[dynonsupport]

Wasn't on the D180 either, sorry.