Allan_Paige
I love flying!
- Joined
- Jun 6, 2012
- Messages
- 2
In the Skyview system, is it permissible to attach the 4 wires coming from the servo directly to the 2 twisted pairs that go to the network using standard butt splices (crimp or solder/heat shrink versions) rather than using the installation manual design with the 2 DB9 connectors that come in the SV-NET-SERVO? The wire run on my airplane from the servo to the SV-NET-SPL is less than 18 inches and it really doesn't need another disconnect.