Single servo installation

[jeffa]

I didn't clearly see an answer in the Skyview install manual, but is it acceptable to have only one servo installed in the system (e.g. just a pitch servo for altitude hold)?

I realize this is not using all the functionality of the system, but due to budget and other constraints, I was just going to install one servo for now.  Just want to verify that it will work and won't cause any problems or crazy messages from the Skyview.  Thanks.

 

[jakej]

Should not be a problem - the system will only work with what is listed in the configuration menu & after you've done the calibration. When you add other items then reconfigure etc.

Jake J