Skyview System Won't Boot

[mikeschumann]

This morning, when I tried to start my Skyview System it wouldn't boot. When I turned on the power to the Skyview, the display stayed completely dark. No initial splash screen or anything else.

I disconnected the main connector to the Skyview Display and verified that there was power on pins 1 and 20. Reconnected connector and tried again. Still completely blank display. No fans running either.

I have the latest firmware installed in the system.

Any suggestions on what might be wrong or did the unit die on me?

 

[krw5927]

If you have the Skyview backup battery, hold down Button #1 and see if it boots from the battery.