Surefly tach issues -

[valerieflyer]

I have a surefly ignition on the Rt. side and slick mag on the left. I initally installed with resistors (about 60k) on both sides. slick mag output fine, no output on surefly. I bought the surefly tach 2 box and installed on rt side using low voltage input. Now, I suddenly do have not tach signal on the left - didn't change anything on that side. Dyon install manual says the EMS should be able to switch from low to high voltage inputs during mag check? Any advice appreciated.

thanks,
Valerie

 

[valerieflyer]

never mind - broken wire issue - no big deal