SV-HDX 1100 first power up

[guppy guy]

After one year of wiring the airplane and panel, I am approaching the first power-up of my SV-HDX 1100 and network equipment.
I could use any advice anyone may have.
Thank you!

 

[maartenversteeg]

Verify that all the power is present on the correct pins and with the correct polarity, without the avionics inserted only then slide in the avionics

 

[Rhino]

A good beer always helps.

 

[Albee]

Also verify pin-to-pin continuity for every wire, and no continuity to power or ground on pins that shouldn't have them. It's best to have someone other than yourself do this, from your installation schematics. And if you haven't already, have someone verify that your schematics meet what Dynon says.