Switch ground pins on D37

[Clotilde]

Hi,
I have two questions regarding grounds on D37:

- I get RPM information directly from the magnetometers. And the mag documentation wiring diagram shows a connection to "tach" instrument ground. Then I used two grounds from D37 (one for the left mag and one for the right). Here is my question: can I take any ground from D37?

- I used ground pin that was supposed to go on manifold pressure sensor: can ground pins be switched? I guess they all connect to the EMS ground that is supposed to be the same ground.

Thank you for your answer
Clotilde

 

[jakej]

Yes, any of the Dynon grounds will do as they are all interconnected.

 

[Clotilde]

Thank you!