You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Tacho
- Thread starter paul
- Start date
- Joined
- Mar 23, 2005
- Messages
- 13,226
Check the values of your green/yellow/red lines. They're probably smooshed together.
We really haven't heard of problems with the Jabiru tachometer setup. Does it happen all the time, or only at certain RPMs/configurations?
We really haven't heard of problems with the Jabiru tachometer setup. Does it happen all the time, or only at certain RPMs/configurations?
180D tacho still reading digital only no dial reading?
I have checked pin 32, green & white left tacho pickup, It is connected to white alternator wire on jab.
can you help?
Ps solved jumpy digital reading. Spoke to Jabiru who suggested inserting a 30k resistor to smooth spikes in alternator.
Still need dial reading to work thou?
Re fuel flow, Blew in sensor as you suggested still no reading.
Must be a dud sensor? Awaiting arrival of new sensor from Horeshams Victoria
I have checked pin 32, green & white left tacho pickup, It is connected to white alternator wire on jab.
can you help?
Ps solved jumpy digital reading. Spoke to Jabiru who suggested inserting a 30k resistor to smooth spikes in alternator.
Still need dial reading to work thou?
Re fuel flow, Blew in sensor as you suggested still no reading.
Must be a dud sensor? Awaiting arrival of new sensor from Horeshams Victoria
- Joined
- Mar 23, 2005
- Messages
- 13,226
What are all of the values under SETUP>SENSORS>TACH. There is probably something there that is set such that the needle never moves. The values in this menu determine the swing of the tach needle.