Traffic Display?

[midlifeflyer]

A client's new-to-him SportCruiser with SkyView HDX. Latest firmware. Looks like everything is there. Current METARs in the airport INFO pages so we are obviously receiving ADS-B In. We even get a "TIS-B OK" on the map. But no traffic is being displayed. (Actually, I'm not really sure weather is being displayed on the map, but that's because they days have been clear.).

What should I be looking at to troubleshoot? Thanks.

 

[skysailor]

Look for the LAYERS label over a button when you choose the MAP menu. Traffic/WX is toggled on or off here. It is defaulted off. Should all display as soon as you toggle the Traffic/WX to on.

 

[midlifeflyer]

Look for the LAYERS label over a button when you choose the MAP menu. Traffic/WX is toggled on or off here. It is defaulted off. Should all display as soon as you toggle the Traffic/WX to on.

Thank you. MAP > LAYERS > WEATHER IS toggled on. No traffic.

 

[Dynon]

There are also traffic toggles in the deep setup menu that you should check the status of.

 

[midlifeflyer]

I may have solved it with an assist fro Dynon support. The GPS needed updating ("GPS FIX STATUS").

 

[midlifeflyer]

Hi, @GalinHdz

 

[serhito]

Did it happen all the time, or was it intermittent ?
I've had weird behavior as well. Before latest version, I would lose all traffic and only see TIS OK.
With the new revision, it seems a bit better, but traffic still sometimes disappear.
Question : if there are no traffic around, does it go to TIS OK until any traffic reappears, where it would revert to ADSB OK ?

 

[midlifeflyer]

Did it happen all the time, or was it intermittent ?
I've had weird behavior as well. Before latest version, I would lose all traffic and only see TIS OK.
With the new revision, it seems a bit better, but traffic still sometimes disappear.
Question : if there are no traffic around, does it go to TIS OK until any traffic reappears, where it would revert to ADSB OK ?

When I wasn't seeing it, I never saw anything, even flying through Class C and having traffic pointed out to me. It looks like it's functioning normally now but I don't "see" how I can be sure it's not missing things.

 

[dbwindom]

My plane has been grounded for 4 months, but got back into the air today, after updated my Dynon with Version 16.2.4 as part of my condition inspection.
I did not see ANY ADS-B traffic on my SkyView Touch, until the the last 5 minutes of my 1hour flight. I confirmed with an inbound a/c that HE saw ME, but I was not seeing anyone else.
Not casting blame,..just trying to narrow down my focus...Has anyone had problems with ADS-B after uploading 16.2.4?
Thanks.