johnsteichen
New Member
- Joined
- Sep 18, 2010
- Messages
- 227
At my last pitot/static/transponder check, the technician reported that the function of the dynon transponder was good, BUT it was putting out very low power. This jives with the complaints I had been getting from ATC and I frequently have to resort to my secondary Garmin transponder.
It is installed in a Glastar, with the transponder remote on the floor of the cockpit, with a 10 inch coax wip connecting to the transponder antenna. There is an 8-10 inch square aluminum ground plane.
Can I send the transponder in for a power output checkup?
It is installed in a Glastar, with the transponder remote on the floor of the cockpit, with a 10 inch coax wip connecting to the transponder antenna. There is an 8-10 inch square aluminum ground plane.
Can I send the transponder in for a power output checkup?