Ive connected the GPS serial connection to pin #3 on the transponder. I have a Garmin 430W and the RS232 channel 2 is set to ADSB out. The transonder page of the Skyview set up still says not compliant. Can anyone point me to the set up configurations I should use on Skyview's set up pages? Thanks
Transponder set up
- Thread starter Doug94
- Start date
On the compliance page, what is the reason given?
One guess based on the information in your post: your 430W needs to be set to ADS-B+ format, not just ADS-B format. If it's not available, your 430W might need a software upgrade.
One guess based on the information in your post: your 430W needs to be set to ADS-B+ format, not just ADS-B format. If it's not available, your 430W might need a software upgrade.
Carl_Froehlich
Active Member
- Joined
- Aug 22, 2007
- Messages
- 323
The 430W needs software version 5.0 or newer for ADS-B out.
Carl
Carl
swatson999
Well-Known Member
- Joined
- Oct 6, 2010
- Messages
- 1,640
ADS-B+ (not sure which version this requires), not just ADS-B (as noted above).
swatson999
Well-Known Member
- Joined
- Oct 6, 2010
- Messages
- 1,640
Nice. My local shop charged me $95.
THIS is what pisses me off about Garmin...well, another thing...that they feed us this cock-and-bull story about how upgrades HAVE to be done by a licensed shop, blah blah blah, when in reality it's as simple as inserting a card and punching a few buttons.
And all the more reason to appreciate companies like Dynon, in the experimental world, that actually allow their customers to use their brains and follow instructions (and save money).