Unused AOA port

[piersherbert]

If I am not using the AOA probe, what should I do with the unused port on the ADAHRS - leave it open or blank it off?

Regards

Ortac

 

[skysailor]

The ADAHRS came with a plastic plug in the port. Leaving it installed will prevent contamination of the port which might occur if left open.

 

[bbtapb]

The AOA measurement is via differential to pitot pressure. If tee'ed to pitot, there will be no pressure across the sensor.

 

[dynonsupport]

You don't need to tee it into the pitot if you aren't using it. Just leave the red plastic plug in it.