Unused wires on 37 pin connector

[hornet2008]

Is it OK to remove the unused wires from the 37 pin connector? I'm sure I have read somewhere you can but can,t find the reference now. I have about 15 unused pins.
Thanks Peter

 

[dynonsupport]

If you've determined that you'll never use those pins, then yes, feel free to remove any wire from the EMS D37F connector. Note that it's a bit tricky to do so with the big heat-shrink over the bundle - you may have to cut off the heat shrink.

Is it OK to remove the unused wires from the 37 pin connector? I'm sure I have read somewhere you can but can,t find the reference now. I have about 15 unused pins.
Thanks Peter

 

[hornet2008]

Thanks
Peter